Rubber Accessories

WAKEFIELD (F1B) PROP UNITS & ACCESSORIES
The prop units are now out of production. However for these Free Flight Supplies units I still have a quantity of spare parts available as follows: Nose ring £2.00; shaft £1.90; stop pin and clip £1.30; Montreal pin and clip £1.30; rear hook £1.90; front nut £1.25; roots £0.90 per pair; Flexible spinners red, black, white, yellow and green, £0.49; Springs set of 2, £0.30; set of bearings £4.00. There are some part finished units left that with some work could be finished £15.00 for a set of parts. Adjustable pitch hubs for use separately or with prop hub, £4.50 per pair. 

F1B MOTOR TUBE, BOOM
Motor tube - 3 layers 93gm Kevlar 600 mm x 30.0 mm to 28.0 mm dia,  22 gms £25.00
Boom – (carbon fibre/alloy) 12.0 mm to 5.0 mm x 740, 7.0 gms  £23.00
Boom – (carbon fibre) 13.5 mm to 4.9 mm x 900, 9.5 gms  £23.00 

F1G MOTOR TUBE, BOOM
Motor tube - 2 layers 93gm Kevlar 390 mm x 20.0 mm to 18.0 mm dia, 7 gms £25.00
Boom – (carbon fibre cloth) 12.0 mm to 4.5 mm x 770, 4.5 gms £23.00
Couplers £15.00

JOURNAL RACES
Journal races for F1B prop units or similar use. 3/8" OD for 1/8" shaft, 5/32" deep with flanges deep grooved. £4.00 for a pair of bearings.

FREE FLIGHT NEWS (FFN) (F1B) PROP UNITS
I have a few plus vspare parts left in stock, ask for details and prices.

WING JOINERS
Full details see Glider Accessories Page

F1B 3.0 mm x 90 mm £7.00 .

THRUST RACES

14 swg (2 mm) 3 piece nylon with steel balls and steel outer washers  £3.50 each

16 swg (1/16”) 3 piece nylon with steel balls and steel outer washers  £3.50 each

BRASS BUSHES
14, 16, 18, 20 SWG £2.50 each.

RUBBER BOBBINS
One piece aluminium, very thin wall, very light
2) hole size 5/32", 3/4" dia. 1/4" wide £0.95 
3) hole size 5/32", 3/4" dia. 3/8" wide £0.95 

Delrin, very light
1) hole size 1/8", 12mm dia 3/16" wide £0.80 
2) hole size 1/8", 15mm dia 1/4" wide £0.90 
3) hole size 3/16", 20mm dia 3/8" wide £1.10 
4) hole size 1/4", 20mm dia 3/8" wide £1.10  
5) hole size 1/4", 25mm dia 3/8" wide £1.20  

Use with alloy tube or pultruded carbon fibre tube see rear motor peg material below.

FREE FLIGHT NEWS (FFN) RUBBER BOBBINS
One piece aluminium, thin wall tube with ends machined to clip into a winding tube. OD 1/4" x 1" long will take 5/32" motor peg. £0.10  .

REAR MOTOR PEG MATERIAL
HE30TF alloy tube 22 swg wall thickness.

3/16" OD - £1.50 per foot 
1/4" OD - £1.50 per foot
5/16" OD - £1.50 per foot .

The tubes can be fitted together to make rear motor peg assemblies for rubber models or use in with bobbins.

Pultruded Carbon Fibre Tube
0.125" (3.18mm) OD x 0.070" (1.78mm) ID x 36" (915mm) - £3.00 
0.196" (4.98mm) OD x 0.120" (3.00mm) ID x 36" (915mm) - £3.00 

LIGHTWEIGHT CARBON FIBRE TUBES
Lightweight carbon fibre motor tubes. Special tubes from Mike Francies for lightweight rubber models

PROP LOOPS (TIM GRAY STYLE)
16swg mini (P30) ) £0.50 plus post. Sheathing not required.
16swg small (Cd'h), £0.60 plus post. Plastic tube for sheathing £2.00 per metre.

16swg small long(Cd'h), £0.70 plus post. Plastic tube for sheathing £2.00 per metre.
16 swg standard (open and F1B) £0.60 plus post. Plastic tube for sheathing £2.00 per metre .
16 swg standard - long (open and F1B) £0.70 plus post. Plastic tube for sheathing £2.00 per metre.
14 swg heavy duty (open and F1B) £0.50, plus post. Plastic tube for sheathing £2.00 per metre

IGRA RUBBER MODEL PROPELLERS
240 mm £2.25, 200 mm £2.00, 150mm £1.75. Very thin light blades that can be trimmed to the desired shape. The 240mm prop is the P-30 propeller of choice. For complete units see SPENCER WILLIS items below.

BACK YARD PROPELLERS

From the suppliers of Asuka tissue in Japan small rubber model propellers 100mm and 120mm diameter £1.50, 150mm and 180mm £2.00

SPENCER WILLIS
Spare prop units for Spencer's P30 and P20 plus 150mm. These units feature IGRA propellers. 240mm (10" P30) £5.50,  200mm (8") P20 £4.50, 150mm (6")  £3.50

P20 complete front end £6.50  P30 complete front end  £7.50                                                                                                                          

HAND CARVED PROPELLERS FOR SPENCER WILLIS KITS
LANZO DUPLEX complete nose unit £32.00 propeller only £29.00 
YANKEE IV complete nose unit £35.00 propeller only £33.00 
1937 KORDA CLASS C complete nose unit £25.00 propeller only £22.00 
1939 KORDA  complete nose unit £34.00 propeller only £30.00 
BLACKPOOL ROCK  complete nose unit £25.00 propeller only £22.00 
BUCKERIDGE LIGHTWEIGHT DURATION complete nose unit £28.00 propeller only £24.00
MINI-MANX TAILLESS (18” x 22.24”-21.8”) complete nose unit £30.00 propeller only £27.00 
MAYZEE complete nose unit (open version) £20.00 propeller only £17.00
KK SENATOR complete nose unit £26.00 propeller only £22.00 

MERCURY complete nose unit £24.00 propeller only £20.00

HORRY (preferred option for the Mercury) complete nose unit £24.00 propeller only £20.00

For details of the kits see Kits Page

HAND CARVED PROPELLERS OTHER MODELS
KK GYPSY complete nose unit £30.00 propeller only £25.00 
HEP CAT complete nose unit £30.00 propeller only £28.00 
JAGUAR complete nose unit £30.00 propeller only £34.00  
URCHIN propeller only £32.00 

VERON FLEDGLING 8" or 9 "Felix propeller only both sizes available £14.00

MERCURY MENTOR complete nose unit £31.00 propeller only £25.00

HEP CAT complete nose unit £30.00 propeller only £28.00

CONTESTOR complete nose unit £36.00 propeller only £32.00 

Custom made propellers can be made for other rubber-powered models, enquire regarding details etc. This email address is being protected from spambots. You need JavaScript enabled to view it. to send your e-mail with details of your requirements.

TORQUE METERS
3 Sizes for :– P20/P30 - Mini vintage/Coupe - Vintage/Large rubber – all 3 sizes £14.50 each 

BMFA EDUCATION PROGRAMME
SPARE PROPELLER UNITS - Complete - fits all BMFA models, red 5.5" or black 6" either propeller. £0.70 plus post. See Kits Page For details of the models

KEIL KRAFT
5” plastic propellers to suit flying scale series of models £0.30 
¾” plastic wheels to suit flying scale series of models £0.25 per pair 
1” plastic wheels to suit flying scale series of models £0.30 per pair 

VERON
1” plastic wheels to suit flying scale series of models £0.30 per pair 

KP AERO MODELS PRODUCTS
(092) ADJUSTABLE NOSE BUTTON. Plastic nose button for simple thrust line adjustment. Double pack £3.05 
SIMPLE NOSE BUTTON. (094) Large or (095) small. Bore 0.046" Pack of 10 either size £1.05 
BALL BEARING NOSE BUTTON. Plastic button with built in thrust race. 3 sizes.
(096) 1.0mm, (097)1.2mm, (098)1.6mm single £1.55 
(99) 1.0mm, (100) 1.2mm, (101) 1.6mm pack of 4 £5.10 
SMALL HINGES. (126) pack of 4 £1.25 (127) pack of 12 £2.50
INDOOR RUBBER WINDER (054) 5:1, (055) 10:1 and (056) 15:1 ratio winders (specify preference) - £8.10 each, plus post. See details of counter below.

INDDOR WINDER COUNTER (091) counter kit to add to winder - £5.50 each

LIGHTWEIGHT PLASTIC WHEELS (080) 10mm (3/8") dia pack of 10 £1.05 (081) 22 mm (7/8") dia £1.00 per pair (082) 25 mm (1") dia £1.05 per pair (083) 32 mm (1 1/4") dia £1.25 per pair . .

(111) 10-4 WINDER 10:1 & 4:1 combined winder for medium size outdoor models. Made from nylon reinforced plastic, ball races support the moving parts, spade handle and spring loaded motor attachment, weight 305 grams Now supplied complete with an analog counter £66.35.  The (110)counter is also available as a separate item at £15.30 .

For further detail see KP Aero Website

GIZMOGEEZER PRODUCTS
For the full range of GizmoGeezer rubber model precision products see the Gizmogeezer Products page.

COMPRESSION SPRINGS
12.5mm long x 3.4mm dia, 0.3mm wire. For prop stops, light or medium compression. £1.00 for 10 either strength 

In addition check the generic pages for materials, components, timers, plans, kits and equipment etc.  

See Publications - "Rubber Model Propellers", for help in making and using propellers.

All prices plus postage and packing see Postage & Packaging