UNIDIRECTIONAL CARBON FIBRE MATERIAL

Finished carbon sheet for spars and other structural components.

25" (1000 mm) long 4" (100 mm) wide 0.003" (0.09 mm) thick	£20.00 per sheet
36" (910 mm) long 4" (100 mm) wide 0.005" (0.13 mm) thick	£12.00 per sheet
36" (910 mm) long 6" (150 mm) wide 0.007" (0.18 mm) thick	£20.00 per sheet
48" (1220 mm) long 6" (150 mm) wide 0.007" (0.18 mm) thick	£21.00 per sheet
36" (910 mm) long 3" (75 mm) wide 0.014" (0.36 mm) thick	£12.00 per sheet
48" (1220 mm) long 3" (75 mm) wide 0.014" (0.36 mm) thick	£15.00 per sheet
36" (910 mm) long 3" (75 mm) wide 0.021" (0.54 mm) thick	£20.00 per sheet
48" (1220 mm) long 3" (75 mm) wide 0.021" (0.54 mm) thick	£24.00 per sheet
36" (910 mm) long 3" (75 mm) wide 0.030" (0.76 mm) thick	£25.00 per sheet
48" (1200 mm) long 3" (75 mm) wide 0.030" (0.76 mm) thick	£30.00 per sheet
36" (910 mm) long 3" (75 mm) wide 0.042"(1.06 mm) thick	£30.00 per sheet
48" (1200 mm) long 3" (75 mm) wide 0.042" (1.06 mm) thick	£45.00 per sheet
28" (710 mm) long 3" (75 mm) wide 0.030" - 0.014" thick (0.76 mm - 0.36 mm)	£15.00 per sheet

Some suggested uses: Sheets 1, 2 & 3 capstrips Sheets 4 - 11 spars Sheets 5, 6, 7 trailing edge

The sheet can be cut with a diamond saw and used without recourse to any further finishing. Alternatively cut with heavy duty knife. Fix with with either epoxy or cyano.

UNIDIRECTIONAL CARBON FIBRE MATERIAL CUT TO SIZE

There is a move towards purchasing pre-cut carbon spars rather than using sheet stock to cut ones requirements. The range of spars provided should satisfy most needs. The spars are cut on a diamond saw so can be used straight away without recourse to any further finishing. Cap strips are excluded as these are easily and best cut with a knife from sheet by the user.

Tapered Spars

1.	16" (405 mm) long 0.08" (2 mm) taper to 0.04" (1 mm) 0.007" (0.18 mm) thick	£0.50 each
2.	24" (610 mm) long 0.20" (5 mm) taper to 0.08" (2 mm) 0.014" (0.36 mm) thick,	£1.25 each
3.	24" (610 mm) long 0.20" (5 mm) taper to 0.08" (2 mm) 0.021" (0.54 mm) thick,	£1.50 each
4.	36" (910 mm) long 0.20" (5 mm) taper to 0.08" (2 mm) 0.014" (0.36 mm) thick,	£1.75 each
5.	36" (910 mm) long 0.20" (5 mm) taper to 0.08" (2 mm) 0.021" (0.54 mm) thick,	£2.00 each
6.	36" (910 mm) long 0.54" (10 mm) taper to 0.18" (4 mm) 0.042" (0.54 mm) thick,	£5.00 each
7.	36" (910 mm) long 0.48" (12 mm) taper to 0.18" (4 mm) 0.030" (0.76 mm) thick,	£4.75 each
8.	36" (910 mm) long 0.48" (12 mm) taper to 0.18" (4 mm) 0.042" (1.06 mm) thick,	£5.50 each
19.	12" (305 mm) long 0.25" (6 mm) taper to 0.08" (2 mm) 0.007" (0.18 mm) thick,	£1.00 each
20.	24" (610 mm) long 0.12" (3 mm) taper to 0.06" (1.5 mm) 0.014" (0.36 mm) thick,	£1.25 each
21.	24" (610 mm) long 0.12" (3 mm) taper to 0.06" (1.5 mm) 0.021" (0.54 mm) thick,	£1.75 each
25.	18" (457 mm) long 0.75" (19 mm) taper to 0.20" (5 mm) 1.007 (0.18 mm) thick	£1.25 each
26.	36" (910 mm) long 0.48" (10 mm) taper to 0.18" (4 mm) 0.042" (1.06 mm) thick,	£5.50 each
27.	36" (910 mm) long 0.40" (10 mm) taper to 0.18" (4 mm) 0.030" (.0.76 mm) thick,	£5.50 each

Trailing Edge

9.	24" (610 mm) long 0.10" (2.5 mm) 0.021" (0.54 mm) thick,	£1.50 each
10.	24" (610 mm) long 0.14" (3.5 mm) 0.030" (0.76 mm) thick,	£1.75 each
11.	36" (910 mm) long 0.10" (2.5 mm) 0.030" (0.76 mm) thick,	£1.75 each
12.	36" (910 mm) long 0.14" (3.5 mm) 0.030" (0.76 mm) thick,	£2.50 each
17.	24" (610 mm) long 0.10" (2.5 mm) 0.030" (0.76 mm) thick,	£1.75 each

Spars

13.	24" (610 mm) long 0.06" (1.5 mm) 0.014" (0.36 mm) thick,	£1.75 each
14.	24" (610 mm) long 0.10" (2.5 mm) 0.014" (0.36 mm) thick,	£1.25 each
15.	28" (710 mm) long 0.12" (3.0 mm) 0.030" taper to 0.014" thick (0.76 mm to 0.36 mm),	£1.50 each
16.	28" (710 mm) long 0.20" (5.0 mm) 0.030" taper to 0.014" thick (0.76 mm to 0.36 mm),	£2.50 each
18.	24" (610 mm) long 0.06" (1.5 mm) 0.021" (0.54 mm) thick,	£1.25 each

Strips

22.

Strips for strengthening/reinforcement 270mm x 7 mm x 1.0 mm thick

£1.00 each

Off-cuts from cutting process, please check availability before ordering

	Small	50p each
	Large	£1.00 each

Mix and match your own preferences - just let me know what combinations and sets you want. For complete flying surface package suggestions see Custom Kits

Some suggested uses:

Spar 1 - F1B, F1H, tip, F1G

Spar 2, 3, 20, 21 - F1B, F1H, F1J. centre panels & F1A tips

Spar 4, 5, 6 - F1B and F1H wing.

Spar 7, 8, - F1A and F1C centre panels.

Trailing edge 9, 11, 17 - F1B, F1H, F1J, F1C tail

Trailing edge 10, 12 - F1A, F1C

Spar 13, 14 - F1A, F1B, F1C, F1H, F1J tails, F1G wings

Spar 15, 16 - F1B, F1H, F1J

All prices plus postage and packing see Postage & Packaging